SMC/Western Digital 8003 ISA series adapters

This UnixWare release supports these SMC 8003 series compatible adapters:

SMC8003EP EtherCard PLUS Elite
SMC8003WC EtherCard PLUS Elite 10T
Western Digital WD8003 EtherCard Plus series
Western Digital WD8003 EtherCard Plus Elite series

Standard Microsystems Corporation (SMC) has replaced the Western Digital Ethernet adapters with their own interchangeable adapters. Your SCO system provides support for both the older Western Digital 8003 adapters as well as their SMC replacements.

To complete configuration for these adapters, the Network Configuration Manager prompts you for:

I/O base address
Interrupt vectors
CAUTION: Do not use I/O base addresses 200, 220, 340, 3C0, or 3e0 for WD 8003E adapters. Because of register-address aliasing, these addresses can cause your machine to hang at boot time.
Shared RAM address

For more information, see ``Configuration parameters''.

NOTE: You must manually set jumpers for adapters that are not software configurable.