/usr/man/cat.3/BIO_set_nbio_accept.3
BIO_s_accept(3) OpenSSL BIO_s_accept(3)
NAME
BIO_s_accept, BIO_set_accept_port, BIO_get_accept_port,
BIO_new_accept, BIO_set_nbio_accept, BIO_set_accept_bios,
BIO_set_bind_mode, BIO_get_bind_mode, BIO_do_accept - accept
BIO
SYNOPSIS
#include <openssl/bio.h>
BIO_METHOD *BIO_s_accept(void);
long BIO_set_accept_port(BIO *b, char *name);
char *BIO_get_accept_port(BIO *b);
BIO *BIO_new_accept(char *host_port);
long BIO_set_nbio_accept(BIO *b, int n);
long BIO_set_accept_bios(BIO *b, char *bio);
long BIO_set_bind_mode(BIO *b, long mode);
long BIO_get_bind_mode(BIO *b, long dummy);
#define BIO_BIND_NORMAL 0
#define BIO_BIND_REUSEADDR_IF_UNUSED 1
#define BIO_BIND_REUSEADDR 2
int BIO_do_accept(BIO *b);
DESCRIPTION
BIO_s_accept() returns the accept BIO method. This is a
wrapper round the platform's TCP/IP socket accept routines.
Using accept BIOs, TCP/IP connections can be accepted and
data transferred using only BIO routines. In this way any
platform specific operations are hidden by the BIO
abstraction.
Read and write operations on an accept BIO will perform I/O
on the underlying connection. If no connection is
established and the port (see below) is set up properly then
the BIO waits for an incoming connection.
Accept BIOs support BIO_puts() but not BIO_gets().
If the close flag is set on an accept BIO then any active
connection on that chain is shutdown and the socket closed
when the BIO is freed.
Calling BIO_reset() on a accept BIO will close any active
connection and reset the BIO into a state where it awaits
another incoming connection.
1.0.2t Last change: 2019-09-10 1
BIO_s_accept(3) OpenSSL BIO_s_accept(3)
BIO_get_fd() and BIO_set_fd() can be called to retrieve or
set the accept socket. See BIO_s_fd(3)
BIO_set_accept_port() uses the string name to set the accept
port. The port is represented as a string of the form
"host:port", where "host" is the interface to use and "port"
is the port. The host can be can be "*" which is
interpreted as meaning any interface; "port" has the same
syntax as the port specified in BIO_set_conn_port() for
connect BIOs, that is it can be a numerical port string or a
string to lookup using getservbyname() and a string table.
BIO_new_accept() combines BIO_new() and
BIO_set_accept_port() into a single call: that is it creates
a new accept BIO with port host_port.
BIO_set_nbio_accept() sets the accept socket to blocking
mode (the default) if n is 0 or non blocking mode if n is 1.
BIO_set_accept_bios() can be used to set a chain of BIOs
which will be duplicated and prepended to the chain when an
incoming connection is received. This is useful if, for
example, a buffering or SSL BIO is required for each
connection. The chain of BIOs must not be freed after this
call, they will be automatically freed when the accept BIO
is freed.
BIO_set_bind_mode() and BIO_get_bind_mode() set and retrieve
the current bind mode. If BIO_BIND_NORMAL (the default) is
set then another socket cannot be bound to the same port. If
BIO_BIND_REUSEADDR is set then other sockets can bind to the
same port. If BIO_BIND_REUSEADDR_IF_UNUSED is set then and
attempt is first made to use BIO_BIN_NORMAL, if this fails
and the port is not in use then a second attempt is made
using BIO_BIND_REUSEADDR.
BIO_do_accept() serves two functions. When it is first
called, after the accept BIO has been setup, it will attempt
to create the accept socket and bind an address to it.
Second and subsequent calls to BIO_do_accept() will await an
incoming connection, or request a retry in non blocking
mode.
NOTES
When an accept BIO is at the end of a chain it will await an
incoming connection before processing I/O calls. When an
accept BIO is not at then end of a chain it passes I/O calls
to the next BIO in the chain.
When a connection is established a new socket BIO is created
for the connection and appended to the chain. That is the
chain is now accept->socket. This effectively means that
1.0.2t Last change: 2019-09-10 2
BIO_s_accept(3) OpenSSL BIO_s_accept(3)
attempting I/O on an initial accept socket will await an
incoming connection then perform I/O on it.
If any additional BIOs have been set using
BIO_set_accept_bios() then they are placed between the
socket and the accept BIO, that is the chain will be
accept->otherbios->socket.
If a server wishes to process multiple connections (as is
normally the case) then the accept BIO must be made
available for further incoming connections. This can be done
by waiting for a connection and then calling:
connection = BIO_pop(accept);
After this call connection will contain a BIO for the
recently established connection and accept will now be a
single BIO again which can be used to await further incoming
connections. If no further connections will be accepted the
accept can be freed using BIO_free().
If only a single connection will be processed it is possible
to perform I/O using the accept BIO itself. This is often
undesirable however because the accept BIO will still accept
additional incoming connections. This can be resolved by
using BIO_pop() (see above) and freeing up the accept BIO
after the initial connection.
If the underlying accept socket is non-blocking and
BIO_do_accept() is called to await an incoming connection it
is possible for BIO_should_io_special() with the reason
BIO_RR_ACCEPT. If this happens then it is an indication that
an accept attempt would block: the application should take
appropriate action to wait until the underlying socket has
accepted a connection and retry the call.
BIO_set_accept_port(), BIO_get_accept_port(),
BIO_set_nbio_accept(), BIO_set_accept_bios(),
BIO_set_bind_mode(), BIO_get_bind_mode() and BIO_do_accept()
are macros.
RETURN VALUES
TBA
EXAMPLE
This example accepts two connections on port 4444, sends
messages down each and finally closes both down.
BIO *abio, *cbio, *cbio2;
ERR_load_crypto_strings();
abio = BIO_new_accept("4444");
1.0.2t Last change: 2019-09-10 3
BIO_s_accept(3) OpenSSL BIO_s_accept(3)
/* First call to BIO_accept() sets up accept BIO */
if(BIO_do_accept(abio) <= 0) {
fprintf(stderr, "Error setting up accept\n");
ERR_print_errors_fp(stderr);
exit(0);
}
/* Wait for incoming connection */
if(BIO_do_accept(abio) <= 0) {
fprintf(stderr, "Error accepting connection\n");
ERR_print_errors_fp(stderr);
exit(0);
}
fprintf(stderr, "Connection 1 established\n");
/* Retrieve BIO for connection */
cbio = BIO_pop(abio);
BIO_puts(cbio, "Connection 1: Sending out Data on initial connection\n");
fprintf(stderr, "Sent out data on connection 1\n");
/* Wait for another connection */
if(BIO_do_accept(abio) <= 0) {
fprintf(stderr, "Error accepting connection\n");
ERR_print_errors_fp(stderr);
exit(0);
}
fprintf(stderr, "Connection 2 established\n");
/* Close accept BIO to refuse further connections */
cbio2 = BIO_pop(abio);
BIO_free(abio);
BIO_puts(cbio2, "Connection 2: Sending out Data on second\n");
fprintf(stderr, "Sent out data on connection 2\n");
BIO_puts(cbio, "Connection 1: Second connection established\n");
/* Close the two established connections */
BIO_free(cbio);
BIO_free(cbio2);
SEE ALSO
TBA
1.0.2t Last change: 2019-09-10 4
See also BIO_do_accept(3)
See also BIO_get_accept_port(3)
See also BIO_get_bind_mode(3)
See also BIO_new_accept(3)
See also BIO_s_accept(3)
See also BIO_set_accept_bios(3)
See also BIO_set_accept_port(3)
See also BIO_set_bind_mode(3)
Man(1) output converted with
man2html