DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 

fmtmsg(3C)


fmtmsg -- display a message on stderr or system console

Synopsis

   #include <fmtmsg.h>
   

int fmtmsg(long classification, const char *label, int severity, const char *text, const char *action, const char *tag);

Description

Based on a message's classification component, fmtmsg writes a formatted message to stderr, to the console, or to both.

fmtmsg can be used instead of the traditional printf interface to display messages to stderr. fmtmsg, in conjunction with gettxt, provides a simple interface for producing language-independent applications.

A formatted message consists of up to five standard components as defined below. The component, classification, is not part of the standard message displayed to the user, but rather defines the source of the message and directs the display of the formatted message.


classification
Contains identifiers from the following groups of major classifications and subclassifications. Any one identifier from a subclass may be used in combination by ORing the values together with a single identifier from a different subclass. Two or more identifiers from the same subclass should not be used together, with the exception of identifiers from the display subclass. (Both display subclass identifiers may be used so that messages can be displayed to both stderr and the system console).


Major classifications
identify the source of the condition. Identifiers are:

MM_HARD
(hardware),

MM_SOFT
(software), and

MM_FIRM
(firmware).

Message source subclassifications
identify the type of software in which the problem is spotted. Identifiers are:

MM_APPL
(application),

MM_UTIL
(utility), and

MM_OPSYS
(operating system).

Display subclassifications
indicate where the message is to be displayed. Identifiers are: MM_PRINT to display the message on the standard error stream, MM_CONSOLE to display the message on the system console. Neither, either, or both identifiers may be used.

Status subclassifications
indicate whether the application will recover from the condition. Identifiers are:

MM_RECOVER
(recoverable) and

MM_NRECOV
(non-recoverable).

An additional identifier, MM_NULLMC, indicates that no classification component is supplied for the message.


label
Identifies the source of the message. The format of this component is two fields separated by a colon. The first field is up to 10 characters long; the second is up to 14 characters. Suggested usage is that label identifies the package in which the application resides as well as the program or application name. For example, the label UX:cat indicates the UNIX System V package and the cat application.

severity
Indicates the seriousness of the condition. Identifiers for the standard levels of severity are:

MM_HALT
indicates that the application has encountered a severe fault and is halting. Produces the print string HALT.

MM_ERROR
indicates that the application has detected a fault. Produces the print string ERROR.

MM_WARNING
indicates a condition out of the ordinary that might be a problem and should be watched. Produces the print string WARNING.

MM_INFO
provides information about a condition that is not in error. Produces the print string INFO.

MM_NOSEV
indicates that no severity level is supplied for the message.

Other severity levels may be added by using the addseverity routine.


text
Describes the condition that produced the message. If the text string is null, then a message stating that no text has been provided will be issued.

action
Describes the first step to be taken in the error recovery process. fmtmsg precedes each action string with the prefix: TO FIX:. The action string is not limited to a specific size.

tag
An identifier which references on-line documentation for the message. Suggested usage is that tag includes the label and a unique identifying number. A sample tag is UX:cat:146.

Environment variables

There are two environment variables that control the behavior of fmtmsg: MSGVERB and SEV_LEVEL.

MSGVERB tells fmtmsg which message components it is to select when writing messages to stderr. The value of MSGVERB is a colon-separated list of optional keywords. MSGVERB can be set as follows:

   MSGVERB=[keyword[:keyword[:. . .]]]
   export MSGVERB

Valid keywords are: label, severity, text, action, and tag. If MSGVERB contains a keyword for a component and the component's value is not the component's null value, fmtmsg includes that component in the message when writing the message to stderr. If MSGVERB does not include a keyword for a message component, that component is not included in the display of the message. The keywords may appear in any order. If MSGVERB is not defined, if its value is the null-string, if its value is not of the correct format, or if it contains keywords other than the valid ones listed above, fmtmsg selects all components.

The first time fmtmsg is called, it examines the MSGVERB environment variable to see which message components it is to select when generating a message to write to the standard error stream, stderr. The values accepted on the initial call are saved for future calls.

MSGVERB affects only which components are selected for display to the standard error stream. All message components are included in console messages.

SEV_LEVEL defines severity levels and associates print strings with them for use by fmtmsg. The standard severity levels shown below cannot be modified. Additional severity levels can also be defined, redefined, and removed using addseverity [see addseverity(3C)]. If the same severity level is defined by both SEV_LEVEL and addseverity, the definition by addseverity is controlling.


0
(no severity is used)

1
HALT

2
ERROR

3
WARNING

4
INFO

SEV_LEVEL can be set as follows:

   SEV_LEVEL=[description[:description[:...]]]
   export SEV_LEVEL

description is a comma-separated list containing three fields:

   description=severity_keyword,level,printstring

severity_keyword is a character string that is used as the keyword on the -s severity option to the fmtmsg command. (This field is not used by the fmtmsg function.)

level is a character string that evaluates to a positive integer (other than 0, 1, 2, 3, or 4, which are reserved for the standard severity levels). If the keyword severity_keyword is used, level is the severity value passed on to the fmtmsg function.

printstring is the character string used by fmtmsg in the standard message format whenever the severity value level is used.

If a description in the colon list is not a three-field comma list, or, if the second field of a comma list does not evaluate to a positive integer, that description in the colon list is ignored.

The first time fmtmsg is called, it examines the SEV_LEVEL environment variable, if defined, to see whether the environment expands the levels of severity beyond the five standard levels and those defined using addseverity. The values accepted on the initial call are saved for future calls.

Errors

The exit codes for fmtmsg are the following:

MM_OK
The function succeeded.

MM_NOTOK
The function failed completely.

MM_NOMSG
The function was unable to generate a message on the standard error stream, but otherwise succeeded.

MM_NOCON
The function was unable to generate a console message, but otherwise succeeded.

Usage

Use in applications

One or more message components may be systematically omitted from messages generated by an application by using the null value of the argument for that component.

The table below indicates the null values and identifiers for fmtmsg arguments.

Argument Type Null-Value Identifier
label char* (char*) NULL MM_NULLLBL
severity int 0 MM_NULLSEV
class long 0L MM_NULLMC
text char* (char*) NULL MM_NULLTXT
action char* (char*) NULL MM_NULLACT
tag char* (char*) NULL MM_NULLTAG

 Argument   Type    Null-Value     Identifier
 label      char*   (char*) NULL   MM_NULLLBL
 severity   int     0              MM_NULLSEV
 class      long    0L             MM_NULLMC
 text       char*   (char*) NULL   MM_NULLTXT
 action     char*   (char*) NULL   MM_NULLACT
 tag        char*   (char*) NULL   MM_NULLTAG

Another means of systematically omitting a component is by omitting the component keyword(s) when defining the MSGVERB environment variable (see the ``Environment Variables'' section).

Example 1

The following example of fmtmsg:
   fmtmsg(MM_PRINT, "UX:cat", MM_ERROR,
   "invalid syntax",
   "refer to manual", "UX:cat:001")

produces a complete message in the standard message format:

   UX:cat: ERROR: invalid syntax
           TO FIX: refer to manual   UX:cat:001

Example 2

When the environment variable MSGVERB is set as follows:

   MSGVERB=severity:text:action

and the Example 1 is used, fmtmsg produces:

   ERROR: invalid syntax
   TO FIX: refer to manual

Example 3

When the environment variable SEV_LEVEL is set as follows:
   SEV_LEVEL=note,5,NOTE

the following call to fmtmsg:

   fmtmsg(MM_UTIL | MM_PRINT, "UX:cat", 5,
   "invalid syntax",
   "refer to manual", "UX:cat:001")

produces:

   UX:cat: NOTE: invalid syntax
           TO FIX: refer to manual   UX:cat:001

References

addseverity(3C), fmtmsg(1), fprintf(3S), gettxt(3C)

Notices

A simpler and slightly different standard error message format and interfaces pfmt, vpfmt, lfmt and vlfmt are available instead of fmtmsg. fmtmsg will be removed and replaced by pfmt(3C) in a future release.
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 25 April 2004