DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 
(BSD System Compatibility)

man(5bsd)


man -- macros to format Reference Manual pages

Synopsis

   nroff -man filename . . .
   

troff -man filename . . .

Description

These macros are used to lay out the reference pages in this manual. Note: if filename contains format input for a preprocessor, the commands shown above must be piped through the appropriate preprocessor. This is handled automatically by man(1). See the ``Conventions'' section.

Any text argument t may be zero to six words. Quotes may be used to include <Space> characters in a \(lqword\(rq. If text is empty, the special treatment is applied to the next input line with text to be printed. In this way .I may be used to italicize a whole line, or .SB may be used to make small bold letters.

A prevailing indent distance is remembered between successive indented paragraphs, and is reset to default value upon reaching a non-indented paragraph. Default units for indents i are ens.

Type font and size are reset to default values before each paragraph, and after processing font and size setting macros.

These strings are predefined by -man:


\*R
``®'', `(Reg)' in nroff.

\*S
Change to default type size.

Requests

* n.t.l. = next text line; p.i. = prevailing indent

  Cause If no  
Request Break Argument Explanation
.B t no t=n.t.l.* Text is in bold font.
.BI t no t=n.t.l. Join words, alternating bold and italic.
.BR t no t=n.t.l. Join words, alternating bold and roman.
.DT no .5i 1i . . . Restore default tabs.
.HP i yes i=p.i.* Begin paragraph with hanging indent. Set prevailing indent to i.
.I t no t=n.t.l. Text is italic.
.IB t no t=n.t.l. Join words, alternating italic and bold.
.IP x i yes x="" Same as .TP with tag x.
.IR t no t=n.t.l. Join words, alternating italic and roman.
.IX t no - Index macro.
.LP yes - Begin left-aligned paragraph. Set prevailing indent to .5i.
.PD d no d=.4v Set vertical distance between paragraphs.
.PP yes - Same as .LP.

          Cause  If no
 Request  Break  Argument      Explanation
 .B t     no     t=n.t.l.*     Text is in bold font.
 .BI t    no     t=n.t.l.      Join words, alternating bold and italic.
 .BR t    no     t=n.t.l.      Join words, alternating bold and roman.
 .DT      no     .5i 1i . . .  Restore default tabs.
 .HP i    yes    i=p.i.*       Begin paragraph with hanging indent.  Set
                               prevailing indent to i.
 .I t     no     t=n.t.l.      Text is italic.
 .IB t    no     t=n.t.l.      Join words, alternating italic and bold.
 .IP x i  yes    x=""          Same as .TP with tag x.
 .IR t    no     t=n.t.l.      Join words, alternating italic and roman.
 .IX t    no     -             Index macro.
 .LP      yes    -             Begin left-aligned paragraph.  Set
                               prevailing indent to .5i.
 .PD d    no     d=.4v         Set vertical distance between paragraphs.
 .PP      yes    -             Same as .LP.

  Cause If no  
Request Break Argument Explanation
.RE yes - End of relative indent. Restores prevailing indent.
.RB t no t=n.t.l. Join words, alternating roman and bold.
.RI t no t=n.t.l. Join words, alternating roman and italic.
.RS i yes i=p.i. Start relative indent, increase indent by i. Sets prevailing indent to .5i for nested indents.
.SB t no - Reduce size of text by 1 point, make text bold.
.SH t yes - Section Heading.
.SM t no t=n.t.l. Reduce size of text by 1 point.
.SS t yes t=n.t.l. Section Subheading.
.TH n s d f m yes - Begin reference page n, of section s; d is the date of the most recent change. If present, f is the left page footer; m is the main page (center) header. Sets prevailing indent and tabs to .5i.
.TP i yes i=p.i. Begin indented paragraph, with the tag given
      on the next text line. Set prevailing indent to i.

                Cause  If no
 Request        Break  Argument  Explanation
 .RE            yes    -         End of relative indent.  Restores prevailing
                                 indent.
 .RB t          no     t=n.t.l.  Join words, alternating roman and bold.
 .RI t          no     t=n.t.l.  Join words, alternating roman and italic.
 .RS i          yes    i=p.i.    Start relative indent, increase indent by i.  Sets
                                 prevailing indent to .5i for nested indents.
 .SB t          no     -         Reduce size of text by 1 point, make text bold.
 .SH t          yes    -         Section Heading.
 .SM t          no     t=n.t.l.  Reduce size of text by 1 point.
 .SS t          yes    t=n.t.l.  Section Subheading.
 .TH n s d f m  yes    -         Begin reference page n, of section s; d is the
                                 date of the most recent change.  If present, f is
                                 the left page footer; m is the main page (center)
                                 header.  Sets prevailing indent and tabs to .5i.
 .TP i          yes    i=p.i.    Begin indented paragraph, with the tag given
                                 on the next text line. Set prevailing indent to i.

Conventions

When formatting a manual page, man examines the first line to determine whether it requires special processing. For example a first line consisting of:
   '\" t

indicates that the manual page must be run through the tbl(1bsd) preprocessor.

A typical manual page for a command or function is laid out as follows:


.TH title [1-8]
The name of the command or function, which serves as the title of the manual page. This is followed by the number of the section in which it appears.

.SH NAME
The name, or list of names, by which the command is called, followed by a dash and then a one-line summary of the action performed. All in roman font, this section contains no troff(1bsd) commands or escapes, and no macro requests. It is used to generate the whatis(1bsd) database.

.SH SYNOPSIS

Commands:
The syntax of the command and its arguments, as typed on the command line. When in boldface, a word must be typed exactly as printed. When in italics, a word can be replaced with an argument that you supply. References to bold or italicized items are not capitalized in other sections, even when they begin a sentence.

Syntactic symbols appear in roman face:


[ ]
An argument, when surrounded by brackets is optional.

|
Arguments separated by a vertical bar are exclusive. You can supply only one item from such a list.

. . .
Arguments followed by an ellipsis can be repeated. When an ellipsis follows a bracketed set, the expression within the brackets can be repeated.

Functions:
If required, the data declaration, or #include directive, is shown first, followed by the function declaration. Otherwise, the function declaration is shown.

.SH DESCRIPTION
A narrative overview of the command or function's external behavior. This includes how it interacts with files or data, and how it handles the standard input, standard output and standard error. Internals and implementation details are normally omitted. This section attempts to provide a succinct overview in answer to the question, ``what does it do?''

Literal text from the synopsis appears in constant width, as do literal filenames and references to items that appear elsewhere in the reference manuals. Arguments are italicized.

If a command interprets either subcommands or an input grammar, its command interface or input grammar is normally described in a USAGE section, which follows the OPTIONS section. The DESCRIPTION section only describes the behavior of the command, not that of subcommands.


.SH OPTIONS
The list of options along with a description of how each affects the command's operation.

.SH FILES
A list of files associated with the command or function.

.SH REFERENCES
A comma-separated list of related manual pages, followed by references to other published materials.

.SH DIAGNOSTICS
A list of diagnostic messages and an explanation of each.

.SH NOTICES
A description of limitations, known defects, and possible problems associated with the command or function.

Files


/usr/ucblib/doctools/tmac/an

References

man(1), nroff(1bsd), troff(1bsd), whatis(1bsd)
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 25 April 2004