#include <db.h>

int
DBcursor->c_get(DBC *DBcursor,
    DBT *key, DBT *data, u_int32_t flags);

int
DBcursor->c_pget(DBC *DBcursor,
    DBT *key, DBT *pkey, DBT *data, u_int32_t flags);

Description: DBcursor->c_get

The DBcursor->c_get method retrieves key/data pairs from the database. The address and length of the key are returned in the object to which key refers (except for the case of the DB_SET flag, in which the key object is unchanged), and the address and length of the data are returned in the object to which data refers.

When called on a cursor opened on a database that has been made into a secondary index using the DB->associate method, the DBcursor->c_get and DBcursor->c_pget methods return the key from the secondary index and the data item from the primary database. In addition, the DBcursor->c_pget method returns the key from the primary database. In databases that are not secondary indices, the DBcursor->c_pget method will always fail.

Modifications to the database during a sequential scan will be reflected in the scan; that is, records inserted behind a cursor will not be returned while records inserted in front of a cursor will be returned.

In Queue and Recno databases, missing entries (that is, entries that were never explicitly created or that were created and then deleted) will be skipped during a sequential scan.

Unless otherwise specified, the DBcursor->c_get method returns a non-zero error value on failure and 0 on success.

If DBcursor->c_get fails for any reason, the state of the cursor will be unchanged.

Parameters

data

The data DBT operated on.

flags

The flags parameter must be set to one of the following values:

DB_CURRENT

Return the key/data pair to which the cursor refers.

The DBcursor->c_get method will return DB_KEYEMPTY if DB_CURRENT is set and the cursor key/data pair was deleted.

DB_FIRST

The cursor is set to refer to the first key/data pair of the database, and that pair is returned. If the first key has duplicate values, the first data item in the set of duplicates is returned.

If the database is a Queue or Recno database, DBcursor->c_get using the DB_FIRST flag will ignore any keys that exist but were never explicitly created by the application, or were created and later deleted.

The DBcursor->c_get method will return DB_NOTFOUND if DB_FIRST is set and the database is empty.

DB_GET_BOTH

The DB_GET_BOTH flag is identical to the DB_SET flag, except that both the key and the data parameters must be matched by the key and data item in the database.

When used with the DBcursor->c_pget method version of this method on a secondary index handle, both the secondary and primary keys must be matched by the secondary and primary key item in the database. It is an error to use the DB_GET_BOTH flag with the DBcursor->c_get version of this method and a cursor that has been opened on a secondary index handle.

DB_GET_BOTH_RANGE

The DB_GET_BOTH_RANGE flag is identical to the DB_GET_BOTH flag, except that, in the case of any database supporting sorted duplicate sets, the returned key/data pair is the smallest data item greater than or equal to the specified data item (as determined by the comparison function), permitting partial matches and range searches in duplicate data sets.

DB_GET_RECNO

Return the record number associated with the cursor. The record number will be returned in data, as described in DBT. The key parameter is ignored.

For DB_GET_RECNO to be specified, the underlying database must be of type Btree, and it must have been created with the DB_RECNUM flag.

When called on a cursor opened on a database that has been made into a secondary index, the DBcursor->c_get and DBcursor->c_pget methods return the record number of the primary database in data. In addition, the DBcursor->c_pget method returns the record number of the secondary index in pkey. If either underlying database is not of type Btree or is not created with the DB_RECNUM flag, the out-of-band record number of 0 is returned.

DB_JOIN_ITEM

Do not use the data value found in all of the cursors as a lookup key for the primary database, but simply return it in the key parameter instead. The data parameter is left unchanged.

For DB_JOIN_ITEM to be specified, the underlying cursor must have been returned from the DB->join method.

DB_LAST

The cursor is set to refer to the last key/data pair of the database, and that pair is returned. If the last key has duplicate values, the last data item in the set of duplicates is returned.

If the database is a Queue or Recno database, DBcursor->c_get using the DB_LAST flag will ignore any keys that exist but were never explicitly created by the application, or were created and later deleted.

The DBcursor->c_get method will return DB_NOTFOUND if DB_LAST is set and the database is empty.

DB_NEXT

If the cursor is not yet initialized, DB_NEXT is identical to DB_FIRST. Otherwise, the cursor is moved to the next key/data pair of the database, and that pair is returned. In the presence of duplicate key values, the value of the key may not change.

If the database is a Queue or Recno database, DBcursor->c_get using the DB_NEXT flag will skip any keys that exist but were never explicitly created by the application, or those that were created and later deleted.

The DBcursor->c_get method will return DB_NOTFOUND if DB_NEXT is set and the cursor is already on the last record in the database.

DB_NEXT_DUP

If the next key/data pair of the database is a duplicate data record for the current key/data pair, the cursor is moved to the next key/data pair of the database, and that pair is returned.

The DBcursor->c_get method will return DB_NOTFOUND if DB_NEXT_DUP is set and the next key/data pair of the database is not a duplicate data record for the current key/data pair.

DB_NEXT_NODUP

If the cursor is not yet initialized, DB_NEXT_NODUP is identical to DB_FIRST. Otherwise, the cursor is moved to the next non-duplicate key of the database, and that key/data pair is returned.

If the database is a Queue or Recno database, DBcursor->c_get using the DB_NEXT_NODUP flag will ignore any keys that exist but were never explicitly created by the application, or those that were created and later deleted.

The DBcursor->c_get method will return DB_NOTFOUND if DB_NEXT_NODUP is set and no non-duplicate key/data pairs occur after the cursor position in the database.

DB_PREV

If the cursor is not yet initialized, DB_PREV is identical to DB_LAST. Otherwise, the cursor is moved to the previous key/data pair of the database, and that pair is returned. In the presence of duplicate key values, the value of the key may not change.

If the database is a Queue or Recno database, DBcursor->c_get using the DB_PREV flag will skip any keys that exist but were never explicitly created by the application, or those that were created and later deleted.

The DBcursor->c_get method will return DB_NOTFOUND if DB_PREV is set and the cursor is already on the first record in the database.

DB_PREV_NODUP

If the cursor is not yet initialized, DB_PREV_NODUP is identical to DB_LAST. Otherwise, the cursor is moved to the previous non-duplicate key of the database, and that key/data pair is returned.

If the database is a Queue or Recno database, DBcursor->c_get using the DB_PREV_NODUP flag will ignore any keys that exist but were never explicitly created by the application, or those that were created and later deleted.

The DBcursor->c_get method will return DB_NOTFOUND if DB_PREV_NODUP is set and no non-duplicate key/data pairs occur before the cursor position in the database.

DB_SET

Move the cursor to the specified key/data pair of the database, and return the datum associated with the given key.

The DBcursor->c_get method will return DB_NOTFOUND if DB_SET is set and no matching keys are found. The DBcursor->c_get method will return DB_KEYEMPTY if DB_SET is set and the database is a Queue or Recno database, and the specified key exists, but was never explicitly created by the application or was later deleted. In the presence of duplicate key values, DBcursor->c_get will return the first data item for the given key.

DB_SET_RANGE

The DB_SET_RANGE flag is identical to the DB_SET flag, except that in the case of the Btree access method, the key is returned as well as the data item and the returned key/data pair is the smallest key greater than or equal to the specified key (as determined by the Btree comparison function), permitting partial key matches and range searches.

DB_SET_RECNO

Move the cursor to the specific numbered record of the database, and return the associated key/data pair. The data field of the specified key must be a pointer to a memory location from which a db_recno_t may be read, as described in DBT. This memory location will be read to determine the record to be retrieved.

For DB_SET_RECNO to be specified, the underlying database must be of type Btree, and it must have been created with the DB_RECNUM flag.

In addition, the following flags may be set by bitwise inclusively OR'ing them into the flags parameter:

DB_READ_UNCOMMITTED

Read modified but not yet committed data. Silently ignored if the DB_READ_UNCOMMITTED flag was not specified when the underlying database was opened.

DB_MULTIPLE

Return multiple data items in the data parameter.

In the case of Btree or Hash databases, duplicate data items for the current key, starting at the current cursor position, are entered into the buffer. Subsequent calls with both the DB_NEXT_DUP and DB_MULTIPLE flags specified will return additional duplicate data items associated with the current key or DB_NOTFOUND if there are no additional duplicate data items to return. Subsequent calls with both the DB_NEXT and DB_MULTIPLE flags specified will return additional duplicate data items associated with the current key or if there are no additional duplicate data items will return the next key and its data items or DB_NOTFOUND if there are no additional keys in the database.

In the case of Queue or Recno databases, data items starting at the current cursor position are entered into the buffer. The record number of the first record will be returned in the key parameter. The record number of each subsequent returned record must be calculated from this value. Subsequent calls with the DB_MULTIPLE flag specified will return additional data items or DB_NOTFOUND if there are no additional data items to return.

The buffer to which the data parameter refers must be provided from user memory (see DB_DBT_USERMEM). The buffer must be at least as large as the page size of the underlying database, aligned for unsigned integer access, and be a multiple of 1024 bytes in size. If the buffer size is insufficient, then upon return from the call the size field of the data parameter will have been set to an estimated buffer size, and the error DB_BUFFER_SMALL is returned. (The size is an estimate as the exact size needed may not be known until all entries are read. It is best to initially provide a relatively large buffer, but applications should be prepared to resize the buffer as necessary and repeatedly call the method.)

The multiple data items can be iterated over using the DB_MULTIPLE_NEXT macro.

The DB_MULTIPLE flag may only be used with the DB_CURRENT, DB_FIRST, DB_GET_BOTH, DB_GET_BOTH_RANGE, DB_NEXT, DB_NEXT_DUP, DB_NEXT_NODUP, DB_SET, DB_SET_RANGE, and DB_SET_RECNO options. The DB_MULTIPLE flag may not be used when accessing databases made into secondary indices using the DB->associate method.

DB_MULTIPLE_KEY

Return multiple key and data pairs in the data parameter.

Key and data pairs, starting at the current cursor position, are entered into the buffer. Subsequent calls with both the DB_NEXT and DB_MULTIPLE_KEY flags specified will return additional key and data pairs or DB_NOTFOUND if there are no additional key and data items to return.

In the case of Btree or Hash databases, the multiple key and data pairs can be iterated over using the DB_MULTIPLE_KEY_NEXT macro.

In the case of Queue or Recno databases, the multiple record number and data pairs can be iterated over using the DB_MULTIPLE_RECNO_NEXT macro.

The buffer to which the data parameter refers must be provided from user memory (see DB_DBT_USERMEM). The buffer must be at least as large as the page size of the underlying database, aligned for unsigned integer access, and be a multiple of 1024 bytes in size. If the buffer size is insufficient, then upon return from the call the size field of the data parameter will have been set to an estimated buffer size, and the error DB_BUFFER_SMALL is returned. (The size is an estimate as the exact size needed may not be known until all entries are read. It is best to initially provide a relatively large buffer, but applications should be prepared to resize the buffer as necessary and repeatedly call the method.)

The DB_MULTIPLE_KEY flag may only be used with the DB_CURRENT, DB_FIRST, DB_GET_BOTH, DB_GET_BOTH_RANGE, DB_NEXT, DB_NEXT_DUP, DB_NEXT_NODUP, DB_SET, DB_SET_RANGE, and DB_SET_RECNO options. The DB_MULTIPLE_KEY flag may not be used when accessing databases made into secondary indices using the DB->associate method.

DB_RMW

Acquire write locks instead of read locks when doing the retrieval. Setting this flag can eliminate deadlock during a read-modify-write cycle by acquiring the write lock during the read part of the cycle so that another thread of control acquiring a read lock for the same item, in its own read-modify-write cycle, will not result in deadlock.

key

The key DBT operated on.

pkey

The secondary index key DBT operated on.

Errors

The DBcursor->c_get method may fail and return one of the following non-zero errors:

DB_BUFFER_SMALL

The requested item could not be returned due to undersized buffer.

DB_LOCK_DEADLOCK

A transactional database environment operation was selected to resolve a deadlock.

DB_LOCK_NOTGRANTED

A Berkeley DB Concurrent Data Store database environment configured for lock timeouts was unable to grant a lock in the allowed time.

DB_REP_HANDLE_DEAD

The database handle has been invalidated because a replication election unrolled a committed transaction.

DB_REP_LOCKOUT

The operation was blocked by client/master synchronization.

DB_SECONDARY_BAD

A secondary index references a nonexistent primary key.

EINVAL

If the DB_CURRENT or DB_NEXT_DUP flags were specified and the cursor has not been initialized; the DBcursor->c_pget method was called with a cursor that does not refer to a secondary index; or if an invalid flag value or parameter was specified.

Class

See Also