SVR5

mdi_printcfg(D3mdi)

mdi_printcfg -- configuration information printf for MDI drivers

Synopsis

   #include <sys/types.h>
   #include <sys/stream.h>
   #include <sys/stropt.h>
   #include <sys/mdi.h>
   #include <sys/ddi.h>
   
   void mdi_printcfg(const char *name, unsigned base,
                     unsigned offset, int vec, int dma, const char *fmt, ...);

Description

mdi_printcfg( ) announces an MDI driver.

Arguments

name: driver name
base: starting I/O address. Set to 0 if not used.
offset: number of bytes used, starting with base.
vec: interrupt vector. Set to -1 if not used.
dma: DMA channel. set to -1 if not used.
fmt: cmn_err(D3) formatting string. Set to 0 if not used.
...: additional arguments.

Return values

None.

Usage

mdi_printcfg( ) provides a consistent way for drivers to announce themselves during the config(D2mdi) (DDI 8) or the _load(D2mdi) (DDI 7) routines. All drivers should use this interface.

Driver messages may be suppressed from the system console if netcfg is running in character mode or if syslogd is running.

Context and synchronization

Blockable context

Hardware applicability

ISA bus.

Version applicability

mdi: 2, 2.1

Differences between versions

This function is similar to the printcfg(D3oddi) function on SCO OpenServer systems.

References

_load(D2mdi), config(D2mdi)