Tk_SetOptions(3)
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
_________________________________________________________________
NAME
Tk_CreateOptionTable, Tk_DeleteOptionTable, Tk_InitOptions,
Tk_SetOptions, Tk_FreeSavedOptions, Tk_RestoreSavedOptions,
Tk_GetOptionValue, Tk_GetOptionInfo, Tk_FreeConfigOptions,
Tk_Offset - process configuration options
SYNOPSIS
#include <tk.h>
Tk_OptionTable
Tk_CreateOptionTable(interp, templatePtr)
Tk_DeleteOptionTable(optionTable)
int
Tk_InitOptions(interp, recordPtr, optionTable, tkwin)
int
Tk_SetOptions(interp, recordPtr, optionTable, objc, objv, tkwin, savePtr, maskPtr)
Tk_FreeSavedOptions(savedPtr)
Tk_RestoreSavedOptions(savedPtr)
Tcl_Obj *
Tk_GetOptionValue(interp, recordPtr, optionTable, namePtr, tkwin)
Tcl_Obj *
Tk_GetOptionInfo(interp, recordPtr, optionTable, namePtr, tkwin)
Tk_FreeConfigOptions(recordPtr, optionTable, tkwin)
int
Tk_Offset(type, field)
ARGUMENTS
Tcl_Interp *interp (in) A Tcl inter-
preter. Most
procedures use
this only for
returning error
messages; if it
is NULL then no
error messages
are returned.
For
Tk_CreateOptionTable
the value cannot
be NULL; it
gives the
Tk Last change: 8.1 1
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
interpreter in
which the option
table will be
used.
const Tk_OptionSpec *templatePtr (in) Points to an
array of static
information that
describes the
configuration
options that are
supported. Used
to build a
Tk_OptionTable.
The information
pointed to by
this argument
must exist for
the lifetime of
the
Tk_OptionTable.
Tk_OptionTable optionTable (in) Token for an
option table.
Must have been
returned by a
previous call to
Tk_CreateOptionTable.
char *recordPtr (in/out) Points to struc-
ture in which
values of confi-
guration options
are stored;
fields of this
record are modi-
fied by pro-
cedures such as
Tk_SetOptions
and read by pro-
cedures such as
Tk_GetOptionValue.
Tk_Window tkwin (in) For options such
as
TK_OPTION_COLOR,
this argument
indicates the
window in which
the option will
be used. If
optionTable uses
Tk Last change: 8.1 2
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
no window-
dependent
options, then a
NULL value may
be supplied for
this argument.
int objc (in) Number of values
in objv.
Tcl_Obj *const objv[] (in) Command-line
arguments for
setting confi-
guring options.
Tk_SavedOptions *savePtr (out) If not NULL, the
structure
pointed to by
this argument is
filled in with
the old values
of any options
that were modi-
fied and old
values are
restored
automatically if
an error occurs
in
Tk_SetOptions.
int *maskPtr (out) If not NULL, the
word pointed to
by maskPtr is
filled in with
the bit-wise OR
of the typeMask
fields for the
options that
were modified.
Tk_SavedOptions *savedPtr (in/out) Points to a
structure previ-
ously filled in
by Tk_SetOptions
with old values
of modified
options.
Tcl_Obj *namePtr (in) The value of
this object is
the name of a
Tk Last change: 8.1 3
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
particular
option. If NULL
is passed to
Tk_GetOptionInfo
then information
is returned for
all options.
Must not be NULL
when
Tk_GetOptionValue
is called.
type name type (in) The name of the
type of a
record.
field name field (in) The name of a
field in records
of type type.
_________________________________________________________________
DESCRIPTION
These procedures handle most of the details of parsing con-
figuration options such as those for Tk widgets. Given a
description of what options are supported, these procedures
handle all the details of parsing options and storing their
values into a C structure associated with the widget or
object. The procedures were designed primarily for widgets
in Tk, but they can also be used for other kinds of objects
that have configuration options. In the rest of this manual
page "widget" will be used to refer to the object whose
options are being managed; in practice the object may not
actually be a widget. The term "widget record" is used to
refer to the C-level structure in which information about a
particular widget or object is stored.
Note: the easiest way to learn how to use these procedures
is to look at a working example. In Tk, the simplest exam-
ple is the code that implements the button family of widg-
ets, which is in tkButton.c. Other examples are in
tkSquare.c and tkMenu.c.
In order to use these procedures, the code that implements
the widget must contain a static array of Tk_OptionSpec
structures. This is a template that describes the various
options supported by that class of widget; there is a
separate template for each kind of widget. The template
contains information such as the name of each option, its
type, its default value, and where the value of the option
is stored in the widget record. See TEMPLATES below for
more detail.
Tk Last change: 8.1 4
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
In order to process configuration options efficiently, the
static template must be augmented with additional informa-
tion that is available only at runtime. The procedure
Tk_CreateOptionTable creates this dynamic information from
the template and returns a Tk_OptionTable token that
describes both the static and dynamic information. All of
the other procedures, such as Tk_SetOptions, take a
Tk_OptionTable token as argument. Typically,
Tk_CreateOptionTable is called the first time that a widget
of a particular class is created and the resulting
Tk_OptionTable is used in the future for all widgets of that
class. A Tk_OptionTable may be used only in a single inter-
preter, given by the interp argument to
Tk_CreateOptionTable. When an option table is no longer
needed Tk_DeleteOptionTable should be called to free all of
its resources. All of the option tables for a Tcl inter-
preter are freed automatically if the interpreter is
deleted.
Tk_InitOptions is invoked when a new widget is created to
set the default values for all of the widget's configuration
options. Tk_InitOptions is passed a token for an option
table (optionTable) and a pointer to a widget record
(recordPtr), which is the C structure that holds information
about this widget. Tk_InitOptions uses the information in
the option table to choose an appropriate default for each
option, then it stores the default value directly into the
widget record, overwriting any information that was already
present in the widget record. Tk_InitOptions normally
returns TCL_OK. If an error occurred while setting the
default values (e.g., because a default value was erroneous)
then TCL_ERROR is returned and an error message is left in
interp's result if interp is not NULL.
Tk_SetOptions is invoked to modify configuration options
based on information specified in a Tcl command. The com-
mand might be one that creates a new widget, or a command
that modifies options on an existing widget. The objc and
objv arguments describe the values of the arguments from the
Tcl command. Objv must contain an even number of objects:
the first object of each pair gives the name of an option
and the second object gives the new value for that option.
Tk_SetOptions looks up each name in optionTable, checks that
the new value of the option conforms to the type in optionT-
able, and stores the value of the option into the widget
record given by recordPtr. Tk_SetOptions normally returns
TCL_OK. If an error occurred (such as an unknown option
name or an illegal option value) then TCL_ERROR is returned
and an error message is left in interp's result if interp is
not NULL.
Tk Last change: 8.1 5
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
Tk_SetOptions has two additional features. First, if the
maskPtr argument is not NULL then it points to an integer
value that is filled in with information about the options
that were modified. For each option in the template passed
to Tk_CreateOptionTable there is a typeMask field. The bits
of this field are defined by the code that implements the
widget; for example, each bit might correspond to a particu-
lar configuration option. Alternatively, bits might be used
functionally. For example, one bit might be used for
redisplay: all options that affect the widget's display,
such that changing the option requires the widget to be
redisplayed, might have that bit set. Another bit might
indicate that the geometry of the widget must be recomputed,
and so on. Tk_SetOptions OR's together the typeMask fields
from all the options that were modified and returns this
value at *maskPtr; the caller can then use this information
to optimize itself so that, for example, it does not
redisplay the widget if the modified options do not affect
the widget's appearance.
The second additional feature of Tk_SetOptions has to do
with error recovery. If an error occurs while processing
configuration options, this feature makes it possible to
restore all the configuration options to their previous
values. Errors can occur either while processing options in
Tk_SetOptions or later in the caller. In many cases the
caller does additional processing after Tk_SetOptions
returns; for example, it might use an option value to set a
trace on a variable and may detect an error if the variable
is an array instead of a scalar. Error recovery is enabled
by passing in a non-NULL value for the savePtr argument to
Tk_SetOptions; this should be a pointer to an uninitialized
Tk_SavedOptions structure on the caller's stack.
Tk_SetOptions overwrites the structure pointed to by savePtr
with information about the old values of any options modi-
fied by the procedure. If Tk_SetOptions returns success-
fully, the caller uses the structure in one of two ways. If
the caller completes its processing of the new options
without any errors, then it must pass the structure to
Tk_FreeSavedOptions so that the old values can be freed. If
the caller detects an error in its processing of the new
options, then it should pass the structure to
Tk_RestoreSavedOptions, which will copy the old values back
into the widget record and free the new values. If
Tk_SetOptions detects an error then it automatically
restores any options that had already been modified and
leaves *savePtr in an empty state: the caller need not call
either Tk_FreeSavedOptions or Tk_RestoreSavedOptions. If
the savePtr argument to Tk_SetOptions is NULL then
Tk_SetOptions frees each old option value immediately when
it sets a new value for the option. In this case, if an
error occurs in the third option, the old values for the
Tk Last change: 8.1 6
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
first two options cannot be restored.
Tk_GetOptionValue returns the current value of a configura-
tion option for a particular widget. The namePtr argument
contains the name of an option; Tk_GetOptionValue uses
optionTable to lookup the option and extract its value from
the widget record pointed to by recordPtr, then it returns
an object containing that value. If an error occurs (e.g.,
because namePtr contains an unknown option name) then NULL
is returned and an error message is left in interp's result
unless interp is NULL.
Tk_GetOptionInfo returns information about configuration
options in a form suitable for configure widget commands.
If the namePtr argument is not NULL, it points to an object
that gives the name of a configuration option;
Tk_GetOptionInfo returns an object containing a list with
five elements, which are the name of the option, the name
and class used for the option in the option database, the
default value for the option, and the current value for the
option. If the namePtr argument is NULL, then
Tk_GetOptionInfo returns information about all options in
the form of a list of lists; each sublist describes one
option. Synonym options are handled differently depending
on whether namePtr is NULL: if namePtr is NULL then the sub-
list for each synonym option has only two elements, which
are the name of the option and the name of the other option
that it refers to; if namePtr is non-NULL and names a
synonym option then the object returned is the five-element
list for the other option that the synonym refers to. If an
error occurs (e.g., because namePtr contains an unknown
option name) then NULL is returned and an error message is
left in interp's result unless interp is NULL.
Tk_FreeConfigOptions must be invoked when a widget is
deleted. It frees all of the resources associated with any
of the configuration options defined in recordPtr by
optionTable.
The Tk_Offset macro is provided as a safe way of generating
the objOffset and internalOffset values for entries in
Tk_OptionSpec structures. It takes two arguments: the name
of a type of record, and the name of a field in that record.
It returns the byte offset of the named field in records of
the given type.
TEMPLATES
The array of Tk_OptionSpec structures passed to
Tk_CreateOptionTable via its templatePtr argument describes
the configuration options supported by a particular class of
widgets. Each structure specifies one configuration option
and has the following fields:
Tk Last change: 8.1 7
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
typedef struct {
Tk_OptionType type;
const char *optionName;
const char *dbName;
const char *dbClass;
const char *defValue;
int objOffset;
int internalOffset;
int flags;
ClientData clientData;
int typeMask;
} Tk_OptionSpec;
The type field indicates what kind of configuration option
this is (e.g. TK_OPTION_COLOR for a color value, or
TK_OPTION_INT for an integer value). Type determines how
the value of the option is parsed (more on this below). The
optionName field is a string such as -font or -bg; it is the
name used for the option in Tcl commands and passed to pro-
cedures via the objc or namePtr arguments. The dbName and
dbClass fields are used by Tk_InitOptions to look up a
default value for this option in the option database; if
dbName is NULL then the option database is not used by
Tk_InitOptions for this option. The defValue field speci-
fies a default value for this configuration option if no
value is specified in the option database. The objOffset
and internalOffset fields indicate where to store the value
of this option in widget records (more on this below);
values for the objOffset and internalOffset fields should
always be generated with the Tk_Offset macro. The flags
field contains additional information to control the pro-
cessing of this configuration option (see below for
details). ClientData provides additional type-specific data
needed by certain types. For instance, for TK_OPTION_COLOR
types, clientData is a string giving the default value to
use on monochrome displays. See the descriptions of the
different types below for details. The last field,
typeMask, is used by Tk_SetOptions to return information
about which options were modified; see the description of
Tk_SetOptions above for details.
When Tk_InitOptions and Tk_SetOptions store the value of an
option into the widget record, they can do it in either of
two ways. If the objOffset field of the Tk_OptionSpec is
greater than or equal to zero, then the value of the option
is stored as a (Tcl_Obj *) at the location in the widget
record given by objOffset. If the internalOffset field of
the Tk_OptionSpec is greater than or equal to zero, then the
value of the option is stored in a type-specific internal
form at the location in the widget record given by inter-
nalOffset. For example, if the option's type is
TK_OPTION_INT then the internal form is an integer. If the
objOffset or internalOffset field is negative then the value
Tk Last change: 8.1 8
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
is not stored in that form. At least one of the offsets
must be greater than or equal to zero.
The flags field consists of one or more bits ORed together.
At present only a single flag is supported:
TK_OPTION_NULL_OK. If this bit is set for an option then an
empty string will be accepted as the value for the option
and the resulting internal form will be a NULL pointer, a
zero value, or None, depending on the type of the option.
If the flag is not set then empty strings will result in
errors. TK_OPTION_NULL_OK is typically used to allow a
feature to be turned off entirely, e.g. set a cursor value
to None so that a window simply inherits its parent's cur-
sor. Not all option types support the TK_OPTION_NULL_OK
flag; for those that do, there is an explicit indication of
that fact in the descriptions below.
The type field of each Tk_OptionSpec structure determines
how to parse the value of that configuration option. The
legal value for type, and the corresponding actions, are
described below. If the type requires a tkwin value to be
passed into procedures like Tk_SetOptions, or if it uses the
clientData field of the Tk_OptionSpec, then it is indicated
explicitly; if not mentioned, the type requires neither
tkwin nor clientData.
TK_OPTION_ANCHOR
The value must be a standard anchor position such as ne
or center. The internal form is a Tk_Anchor value like
the ones returned by Tk_GetAnchorFromObj.
TK_OPTION_BITMAP
The value must be a standard Tk bitmap name. The inter-
nal form is a Pixmap token like the ones returned by
Tk_AllocBitmapFromObj. This option type requires tkwin
to be supplied to procedures such as Tk_SetOptions, and
it supports the TK_OPTION_NULL_OK flag.
TK_OPTION_BOOLEAN
The value must be a standard boolean value such as true
or no. The internal form is an integer with value 0 or
1.
TK_OPTION_BORDER
The value must be a standard color name such as red or
#ff8080. The internal form is a Tk_3DBorder token like
the ones returned by Tk_Alloc3DBorderFromObj. This
option type requires tkwin to be supplied to procedures
such as Tk_SetOptions, and it supports the
TK_OPTION_NULL_OK flag.
TK_OPTION_COLOR
Tk Last change: 8.1 9
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
The value must be a standard color name such as red or
#ff8080. The internal form is an (XColor *) token like
the ones returned by Tk_AllocColorFromObj. This option
type requires tkwin to be supplied to procedures such
as Tk_SetOptions, and it supports the TK_OPTION_NULL_OK
flag.
TK_OPTION_CURSOR
The value must be a standard cursor name such as cross
or @foo. The internal form is a Tk_Cursor token like
the ones returned by Tk_AllocCursorFromObj. This
option type requires tkwin to be supplied to procedures
such as Tk_SetOptions, and when the option is set the
cursor for the window is changed by calling XDefineCur-
sor. This option type also supports the
TK_OPTION_NULL_OK flag.
TK_OPTION_CUSTOM
This option allows applications to define new option
types. The clientData field of the entry points to a
structure defining the new option type. See the sec-
tion CUSTOM OPTION TYPES below for details.
TK_OPTION_DOUBLE
The string value must be a floating-point number in the
format accepted by strtol. The internal form is a C
double value. This option type supports the
TK_OPTION_NULL_OK flag; if a NULL value is set, the
internal representation is set to zero.
TK_OPTION_END
Marks the end of the template. There must be a
Tk_OptionSpec structure with type TK_OPTION_END at the
end of each template. If the clientData field of this
structure is not NULL, then it points to an additional
array of Tk_OptionSpec's, which is itself terminated by
another TK_OPTION_END entry. Templates may be chained
arbitrarily deeply. This feature allows common options
to be shared by several widget classes.
TK_OPTION_FONT
The value must be a standard font name such as Times
16. The internal form is a Tk_Font handle like the
ones returned by Tk_AllocFontFromObj. This option type
requires tkwin to be supplied to procedures such as
Tk_SetOptions, and it supports the TK_OPTION_NULL_OK
flag.
TK_OPTION_INT
The string value must be an integer in the format
accepted by strtol (e.g. 0 and 0x prefixes may be used
to specify octal or hexadecimal numbers, respectively).
Tk Last change: 8.1 10
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
The internal form is a C int value.
TK_OPTION_JUSTIFY
The value must be a standard justification value such
as left. The internal form is a Tk_Justify like the
values returned by Tk_GetJustifyFromObj.
TK_OPTION_PIXELS
The value must specify a screen distance such as 2i or
6.4. The internal form is an integer value giving a
distance in pixels, like the values returned by
Tk_GetPixelsFromObj. Note: if the objOffset field is
not used then information about the original value of
this option will be lost. See OBJOFFSET VS. INTER-
NALOFFSET below for details. This option type supports
the TK_OPTION_NULL_OK flag; if a NULL value is set, the
internal representation is set to zero.
TK_OPTION_RELIEF
The value must be standard relief such as raised. The
internal form is an integer relief value such as
TK_RELIEF_RAISED. This option type supports the
TK_OPTION_NULL_OK flag; if the empty string is speci-
fied as the value for the option, the integer relief
value is set to TK_RELIEF_NULL.
TK_OPTION_STRING
The value may be any string. The internal form is a
(char *) pointer that points to a dynamically allocated
copy of the value. This option type supports the
TK_OPTION_NULL_OK flag.
TK_OPTION_STRING_TABLE
For this type, clientData is a pointer to an array of
strings suitable for passing to Tcl_GetIndexFromObj.
The value must be one of the strings in the table, or a
unique abbreviation of one of the strings. The inter-
nal form is an integer giving the index into the table
of the matching string, like the return value from
Tcl_GetStringFromObj.
TK_OPTION_SYNONYM
This type is used to provide alternative names for an
option (for example, -bg is often used as a synonym for
-background). The clientData field is a string that
gives the name of another option in the same table.
Whenever the synonym option is used, the information
from the other option will be used instead.
TK_OPTION_WINDOW
The value must be a window path name. The internal
form is a Tk_Window token for the window. This option
Tk Last change: 8.1 11
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
type requires tkwin to be supplied to procedures such
as Tk_SetOptions (in order to identify the applica-
tion), and it supports the TK_OPTION_NULL_OK flag.
STORAGE MANAGEMENT ISSUES
If a field of a widget record has its offset stored in the
objOffset or internalOffset field of a Tk_OptionSpec struc-
ture then the procedures described here will handle all of
the storage allocation and resource management issues asso-
ciated with the field. When the value of an option is
changed, Tk_SetOptions (or Tk_FreeSavedOptions) will
automatically free any resources associated with the old
value, such as Tk_Fonts for TK_OPTION_FONT options or dynam-
ically allocated memory for TK_OPTION_STRING options. For
an option stored as an object using the objOffset field of a
Tk_OptionSpec, the widget record shares the object pointed
to by the objv value from the call to Tk_SetOptions. The
reference count for this object is incremented when a
pointer to it is stored in the widget record and decremented
when the option is modified. When the widget is deleted
Tk_FreeConfigOptions should be invoked; it will free the
resources associated with all options and decrement refer-
ence counts for any objects.
However, the widget code is responsible for storing NULL or
None in all pointer and token fields before invoking
Tk_InitOptions. This is needed to allow proper cleanup in
the rare case where an error occurs in Tk_InitOptions.
OBJOFFSET VS. INTERNALOFFSET
In most cases it is simplest to use the internalOffset field
of a Tk_OptionSpec structure and not the objOffset field.
This makes the internal form of the value immediately avail-
able to the widget code so the value does not have to be
extracted from an object each time it is used. However,
there are two cases where the objOffset field is useful.
The first case is for TK_OPTION_PIXELS options. In this
case, the internal form is an integer pixel value that is
valid only for a particular screen. If the value of the
option is retrieved, it will be returned as a simple number.
For example, after the command .b configure -borderwidth 2m,
the command .b configure -borderwidth might return 7, which
is the integer pixel value corresponding to 2m. Unfor-
tunately, this loses the original screen-independent value.
Thus for TK_OPTION_PIXELS options it is better to use the
objOffset field. In this case the original value of the
option is retained in the object and can be returned when
the option is retrieved. In most cases it is convenient to
use the internalOffset field as well, so that the integer
value is immediately available for use in the widget code
(alternatively, Tk_GetPixelsFromObj can be used to extract
the integer value from the object whenever it is needed).
Tk Last change: 8.1 12
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
Note: the problem of losing information on retrievals exists
only for TK_OPTION_PIXELS options.
The second reason to use the objOffset field is in order to
implement new types of options not supported by these pro-
cedures. To implement a new type of option, you can use
TK_OPTION_STRING as the type in the Tk_OptionSpec structure
and set the objOffset field but not the internalOffset
field. Then, after calling Tk_SetOptions, convert the
object to internal form yourself.
CUSTOM OPTION TYPES
Applications can extend the built-in configuration types
with additional configuration types by writing procedures to
parse, print, free, and restore saved copies of the type and
creating a structure pointing to those procedures:
typedef struct Tk_ObjCustomOption {
char *name;
Tk_CustomOptionSetProc *setProc;
Tk_CustomOptionGetProc *getProc;
Tk_CustomOptionRestoreProc *restoreProc;
Tk_CustomOptionFreeProc *freeProc;
ClientData clientData;
} Tk_ObjCustomOption;
typedef int Tk_CustomOptionSetProc(
ClientData clientData,
Tcl_Interp *interp,
Tk_Window tkwin,
Tcl_Obj **valuePtr,
char *recordPtr,
int internalOffset,
char *saveInternalPtr,
int flags);
typedef Tcl_Obj *Tk_CustomOptionGetProc(
ClientData clientData,
Tk_Window tkwin,
char *recordPtr,
int internalOffset);
typedef void Tk_CustomOptionRestoreProc(
ClientData clientData,
Tk_Window tkwin,
char *internalPtr,
char *saveInternalPtr);
typedef void Tk_CustomOptionFreeProc(
ClientData clientData,
Tk_Window tkwin,
char *internalPtr);
Tk Last change: 8.1 13
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
The Tk_ObjCustomOption structure contains six fields: a name
for the custom option type; pointers to the four procedures;
and a clientData value to be passed to those procedures when
they are invoked. The clientData value typically points to
a structure containing information that is needed by the
procedures when they are parsing and printing options. Res-
toreProc and freeProc may be NULL, indicating that no func-
tion should be called for those operations.
The setProc procedure is invoked by Tk_SetOptions to convert
a Tcl_Obj into an internal representation and store the
resulting value in the widget record. The arguments are:
clientData
A copy of the clientData field in the
Tk_ObjCustomOption structure.
interp
A pointer to a Tcl interpreter, used for error
reporting.
Tkwin
A copy of the tkwin argument to Tk_SetOptions
valuePtr
A pointer to a reference to a Tcl_Obj describing
the new value for the option; it could have been
specified explicitly in the call to Tk_SetOptions
or it could come from the option database or a
default. If the objOffset for the option is non-
negative (the option value is stored as a (Tcl_Obj
*) in the widget record), the Tcl_Obj pointer
referenced by valuePtr is the pointer that will be
stored at the objOffset for the option. SetProc
may modify the value if necessary; for example,
setProc may change the value to NULL to support
the TK_OPTION_NULL_OK flag.
recordPtr
A pointer to the start of the widget record to
modify.
internalOffset
Offset in bytes from the start of the widget
record to the location where the internal
representation of the option value is to be
placed.
saveInternalPtr
A pointer to storage allocated in a
Tk_SavedOptions structure for the internal
representation of the original option value.
Tk Last change: 8.1 14
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
Before setting the option to its new value, set-
Proc should set the value referenced by saveInter-
nalPtr to the original value of the option in
order to support Tk_RestoreSavedOptions.
flags
A copy of the flags field in the Tk_OptionSpec
structure for the option
SetProc returns a standard Tcl result: TCL_OK to indicate
successful processing, or TCL_ERROR to indicate a failure of
any kind. An error message may be left in the Tcl inter-
preter given by interp in the case of an error.
The getProc procedure is invoked by Tk_GetOptionValue and
Tk_GetOptionInfo to retrieve a Tcl_Obj representation of the
internal representation of an option. The clientData argu-
ment is a copy of the clientData field in the
Tk_ObjCustomOption structure. Tkwin is a copy of the tkwin
argument to Tk_GetOptionValue or Tk_GetOptionInfo.
RecordPtr is a pointer to the beginning of the widget record
to query. InternalOffset is the offset in bytes from the
beginning of the widget record to the location where the
internal representation of the option value is stored. Get-
Proc must return a pointer to a Tcl_Obj representing the
value of the option.
The restoreProc procedure is invoked by
Tk_RestoreSavedOptions to restore a previously saved inter-
nal representation of a custom option value. The clientData
argument is a copy of the clientData field in the
Tk_ObjCustomOption structure. Tkwin is a copy of the tkwin
argument to Tk_GetOptionValue or Tk_GetOptionInfo. Inter-
nalPtr is a pointer to the location where internal represen-
tation of the option value is stored. SaveInternalPtr is a
pointer to the saved value. RestoreProc must copy the value
from saveInternalPtr to internalPtr to restore the value.
RestoreProc need not free any memory associated with either
internalPtr or saveInternalPtr; freeProc will be invoked to
free that memory if necessary. RestoreProc has no return
value.
The freeProc procedure is invoked by Tk_SetOptions and
Tk_FreeSavedOptions to free any storage allocated for the
internal representation of a custom option. The clientData
argument is a copy of the clientData field in the
Tk_ObjCustomOption structure. Tkwin is a copy of the tkwin
argument to Tk_GetOptionValue or Tk_GetOptionInfo. Inter-
nalPtr is a pointer to the location where the internal
representation of the option value is stored. The freeProc
must free any storage associated with the option. FreeProc
has no return value.
Tk Last change: 8.1 15
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
KEYWORDS
anchor, bitmap, boolean, border, color, configuration
option, cursor, double, font, integer, justify, pixels,
relief, screen distance, synonym
Tk Last change: 8.1 16
Man(1) output converted with
man2html